Progress (Minor) on Two Bogie Wagons (1/35)

I have been making slow progress on the two Hudson bogie wagons. After having done the four bogies for project from rebuilt Scale Link skips, I started bending some of the etched metal parts while on a small vacation in the summer cottage. Returning from vacation brought a lot of non-modelling demands on my time and other modelling projects even managed to overtake the bogie wagons' place on my worktable. Now it's December and I thought it might be possible to finish the wagons before New Year.



Bending frame/bottom of the wagons. One frame/bottom has been bent up in my little etch bender from Mission Models. A full etch is seen in the top right of the image.

I think I mentioned, that the wagons come without bogies and their associated mountings. After some head scratching I made bogie mountings from scrap brass and nuts to fit my standard M2 bolts. To make life easier I have long time since standardized my use of bolts and nuts for mounting bogies, loco bodies etc. to M2, making sure I'm not in doubt what to do when a nut or bolt is lost. Unfortunately I was one M2 nut short.

My old supplier of small nuts and bolts had closed down so I ordered a nice selection of M2 nuts and bolts from www.modellbauschrauben.de in Germany.


A frame seen from below. Bogie mountings soldered inside the frames. On the other side of the brass piece with a hole in it is a M2 nut to take the bogie mounting bolt.

As a consequence of the missing nut, I decided to concentrate work on one wagon. With the end plates bent up and the associated angles ready to solder in place, it turned out that the angles were too short by several millimetres. Not wanting to worry about who's fault it was (me or the kit designer), I simply soldered the end plates in place. I will fit strengthening angles from brass or plastic profile later.

Being slightly put off by a missing bolt and short angle irons, I put both wagons back into their card board box. I will spend the coming Christmas Holidays doing some preparatory work on my gas generator Schöma and building a Danish army lorry. The wagons will have to wait...

Playing With Track Panels

This weekend I got to play with track panels. Not the 1:32 track panels I bought from James Coldicott, but 1:1 scale track panels with 7 kg/m rail in the gauges of 700 and 600 mm. On the heritage railway where I work as a volunteer, we are currently laying track in a large shed to house all the locos and rolling stock that isn't yet servicable. To maximise use of the building we lay the tracks close, and as the tracks isn't subject to much stress, we chose to use some old track panels.

Three weeks ago we picked out a number of track panels from storage. Itself not an easy task as trees and shrubbery during the years had shot up among the panels.

Loading track panels from the HVB storage facility at km. 1,5. After having chopped down a few trees the excavator could get to the 700 mm. panels having been in storage for more than 20 years.

Laying of track panels is easy and if our panels hadn't been old, a bit croocked and in need of a new sleeper or two, the work would have been no match for our experienced team.

One track is finished, one track is being adjusted while the third track is being assmbled. All with a gauge of 700 mm. Great to work indoor as it was raining cats and dogs outside!

Two tracks are finished. Gravel is poured in the third while the first 600 mm panel is already laid. To the right the laser we use to make sure the tracks are level and to the right height. In the background the excavator is loading a skip with gravel. Just because we like old technology we shouldn't avoid modern blessings that can help us.

3 tracks with 700 mm. gauge and one with 600 mm. gauge in place in the shed. In front is the traverser giving access to the depot tracks. Two more tracks will fill the empty foreground and provide more room for the railway's rolling stock. 

Among our supplies of 600 mm. gauge track panels we found these. They look quite different from what we are used to see in our stacks. From a search through my books and materials, I think they bear a strong resemblance to the French army standard track panel from World War 1. It just seems very unlikely that track from French army stocks should come to Denmark and would be so well preserved 100 years later? Please leave a comment if you recognise the type of track.

Haulage Contractor Hansen's Bedford (1/35)

In Nystrup haulage contractor Hansen was the prime mover of gravel from Nystrup Gravel to costumers that didn't have the possibility to pick up gravel in their own vehicles. The gravel was loaded into lorries at the ramp at Nystrup. Hansen had a small fleet of lorries of quite a varied origin. In the mid 1950's Hansen still had some old ex. German army lorries, a postwar Chevrolet, while the pride of the fleet was the new Bedford O tipper bought specifically to offer fast and easy delivery of gravel. No need for hard work shovelling gravel from the lorry!

Hansen's Bedford O-tipper driving unloaded from Ubehage to Nystrup to pick up a load of gravel.

I started assembly of the Roadcraft Models' kit back in March and finished building in June. After the primer was dry, I air brushed bonnet, cab and rear body with Vallejo 967, Verde Oliva. Front bumper, radiator and front mudguards had a layer of glossy black while the chassis was given a coat of matt black. I applied custom decals from 'Skilteskoven' and they went on very fine, despite a quite demanding surface with metal strapping and rivets on the tailboard. I used Mr. Hobby's decal solutions to help the decals soften and adjust to the surface.

Basic colours applied to the lorry. Next is decals. In the background some of the old 35 mm film canisters I use for mixing and thinning paint. Good thing I kept a bag of them when I switched to digital photography!

I managed to destroy decals and paint on the cab doors when applying matt varnish. The Games Workshop varnish normally works fine on Vallejo paints (and did so on the tailboard), but on the doors something clearly went wrong. I just hate when things like that happens. Particularly when there is no obvious explanation. The doors were stripped of paint and primer and I started all over again. This time I chose to use Vallejo varnish to avoid further nasty surprises.

The license plates are the yellow 1950-1958 type with a single letter indicating which county the lorry came from. After painting I fitted a windshield wiper from the spares box.

I kept the weathering to a minimum. Basically a few washes with thinned oil paints and a light dusting with powdered pastels to represent dust. The rear body inside was weathered somewhat more and I applied a little dried gravel in the corners.

The Bedford O apparently parked on the ramp from the viaduct taking the road between Nystrup and Ubehage over the gravel line. At least no driver is to be seen in the driver's seat?

I peviously built Hansen's Chevrolet lorry and perhaps another lorry from the company will show up on the layout in the future?

Lorries made up a good percentage of the automobiles on Danish roads in the fifties. Almost a third of all automobiles were lorries. It reflects that only a limited number of Danes had the means to buy a car in those years.

Another scan from my collection of the 'Who, What, Where' year books. This time the 1950 issue.

Boxing Two Models (1/35)

Building models from scratch or kits is an exiting way of getting unique models. But it also gives me the challenge of how to preserve them from dust, excessive sun light or the accidental fall to the floor. I have earlier shown how I use some small boxes to store models. Recently I took a larger wooden box in use for two locos and thought I'd better share a few snapshots with you. My loco 3 (the Sala) and 6 (the Jung) now share a wooden box lined with tailor made foam insert to protect them during transport and storage. 

Working with foam to obtain a firm fit around the model.

Both models fitted in their foam beds. The foam bits glued to the box lid (left) applies pressure to the models when the lid is closed,  keeping them firmly in place. The loose foam bit (top) keeps the Sala driver from travelling freely around inside the box.

Box contents clearly marked with numbers in the font 'German Typewriter'. When you have to hand paint, there is no reason to pick a font that isn't compatible with the era of Nystrup Gravel.

Storing models in foam lined boxes is a mixed blessing if I am to believe several online articles. The foam can deteriorate and loose its tension, thereby reducing the protection it provides. That is one thing, but some foam types can actually degrade in a way that makes them stick to a model and even damage paint as a result of chemical reactions. I don't want that to happen, and although my foam lined boxes are still quite new, I check my boxes once a year to make sure everything is still well.

Those modellers modelling in more usual railway modelling scales have products available to them for storing their models. Some are generic and will fit serveral types of models, some are even made for specific models.

Nystrup's Last Crawler Tractor (1/35)

Nystrup Gravel used a Soviet built crawler tractor for pulling machinery and cut down trees from the areas to be quarried. The S-65 was huge and unpractical, but it was bought cheap and in the 1950's you had to use what you could get your hands on, as machinery was under import restrictions. When restrictions lifted somewhat Nystrup Gravel managed to buy a much smaller Ransomes crawler tractor from the United Kingdom.

The Ransomes type MG6 was introduced in 1953 but I don't know when Nystrup Gravel got hold of their's. Here the tiny tractor is photographed outside the loco shed at Nystrup. 

The MG6 was the first crawler tractor I ever built a model of. I assembled a Model Tractor Co. 1:32 kit of a MG6 in 1994 and recently went over it again with some paint and weathering. As with any Model Tractor kit the MG6 is of whitemetal with a small number of etched brass parts. I left off the three point linkage at the rear of the tractor and fitted a protective steel plate with heavy coupling and chain for hauling tasks.

Fuelling of Nystrup Gravel's wheeled or tracked vehicles were usually done from jerry cans. Here the MG6 has been driven to the loco fuelling site. Had 'Stalin' done that, the track would probably have needed repair.

The Ransomes MG6 was a small crawler tractor designed to operate on small orchards and market gardens. They were often fitted with power take-off drive and hydraulic three-point linkage. The first model of the Ransomes crawler, the MG2 was released in 1936. A total of about 15,000 Ransomes MG series tractors were built - 4800 were MG6s. The MG6 was Nystrup's last crawler tractor. It was last seen during the clean up after the close down of the company in the late 1970's, probably ending up as scrap.

750 mm Gauge in Southern Germany

Once a year I usually travel to the 'Feldbahntreff' (last year at the Muskauer Waldeisenbahn) to meet other enthusiasts that keep alive narrow gauge railways – almost all of them with an industrial connection. The mostly continental, German speaking enthusiasts keep each other updated with their latest challenges and accomplishments. This year I chose not to attend and teamed up with some friends for a trip to the 750 mm. railways in Saxony in southeastern Germany.

While not particularly 'industrial' the railways we visited gave us much inspiration. To see how others have developed heritage railways is always interesting and regarding work shop facilities the visits set new goals for us Danes.

99 1741-0 in the work shop at Oberwiesentahl on the Fichtelbergbahn. Notice the well laid out work shop, removable floor panels and over head crane. 99 1741-0 was built in Chemnitz in 1929 and still going strong between shop visits.

The hilly and wooded area gave great views from the trains and one day on the Pressnitztalbahn was devoted to nothing but goods trains. A great day in the woods watching trains.

99 715 with a train of standard gauge wagons on transporters. The train is working uphill towards Jöhstadt.

99 568 and 99 542 ready to double head a long train from Schmalzgrube.

On our way home to Denmark we managed a visit to 'Ferropolis' and the five huge machines once used to quarry brown coal. They are marvelous creations of steel weighing from 700 t. to almost 2.000 t. Not as huge as the F60 Förderbrücke I visited last, year but impressing anyhow.

Bucket and chain excavator type Es 1120 built in 1962 by the VEB Förderanlagen Köthen. The machine weighs 1250 t. Notice the standard German car passing.

Back home I have been getting the etched parts for the David Provan bogie wagons unpacked and ready for bending. While the kits have half etched rivets to be pressed into rivets I have chosen to fit rivets with my trusty method of gluing one plastic rivet head after the other. More on the subject in a future post.

More Bogie Wagons for Nystrup Gravel (1/35)

A few years ago I was fortunate enough to be offered two Hudson bogie wagon kits by a friend from France. The kits were made by David Provan in 1:35 and I'm unsure if they (or other kits by David Provan) are available anymore. The wagons are in etched brass and comes without bogies.

The wagons with steel sides match the two wagons Nystrup Gravel used to transport bagged sand for foundry use. Nystrup's foundry sand was a specialised product that was sold to foundries in both Denmark and Germany. When demand for the product was high, trains of sacks sometimes included the two-axled stone wagons. Even the long bogie wagon that on photos seems to have been mostly used for beer, were sometimes used for foundry sand.

As the kits are not including bogies I roamed through my unbuilt kits and found four Scale Link Hudson skips (item SRWD6) that I decided to use for bogies. I did the same on the beer wagon. I have high hopes for a 1:35/1:32 kit of a standard continental skip so it seemed a good plan to turn the Scale Link skips into bogies.



The beer wagon in front of the loco shed. No less than 34 crates of beer and a few with apple juice make up the cargo. The wagon is modelled after a real Danish prototype used by a contractor on a dam project. The beer crates are kits in etched brass by 'Epokemodeller' while the decals are designed by me and printed by 'Skilteskoven'.



Four Scale Link skips during assembly as bogies for the new flat wagons. Bearings have just been fitted to the axle boxes.

I have the skip frames on my worktable and is slowly getting them assembled and fitted out as bogies with plastic profiles from Evergreen. I use the same method of construction as on the beer wagon as it has achieved good running even on below average Nystrup Gravel track.

 

Five minutes later the four bogies are in different stages of being finished.

I don't expect further progress on the wagons any time soon, as I'm off to Germany next week to watch trains on the Pressnitztalbahn with some friends. We'll probably manage several other locations of interest on the way to and from Saxony. We will be staying in a hotel made up of old sleeping cars - the Wolkensteiner Zughotel. Haven't slept in a sleeping car since travelling through Romania in 1992.